Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
To reset the TPMS warning light on an Opel car (the procedure is the same for all models), we need to get into the car and close all the doors. We pull the handbrake and put the gearbox in neutral. Now let's turn on the ignition - without starting the engine - and press the menu button on the left of the steering wheel, on the arrow lever. With the up / down buttons next to it, we go to search for the submenu "TIRE LEARN" or "tire pressure". Once found, we go to press and hold the SET-CLR key, which is the satellite placed on the arrow lever (on which we have operated so far) for 5 seconds. The machine will emit a double beep and is ready to learn the new pressures. We leave the ignition on. We read the sensors clockwise starting from the front left, front right, rear right, rear left. Whenever a sensor is read, the car emits a horn sound. At this point the learning of the pressures is completed.
Posted on 8 October 2022 by ScegliAuto
How to reset the TMPS light on the Mitsubishi Space Star
(Various brands) Various The guide shows how to reset the tire pressure warning light on the Mitsubishi Space Star. The first step is to turn on the vehicle's instrument pane
How the Kia tire monitoring system works
(Various brands) Various The Tire Pressure Monitoring System - or TMPS - works by notifying you when one or more tires significantly lose their reference pressure. When this
How to have the TMPS indicator even on cars that don't have it as standard
(Various brands) Various This video is aimed at all slightly old cars that do not have the tire monitoring system (tmps) already fitted as standard, in order to take advantag Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.086
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |