Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset a Ford window regulator

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Side window
Operation: How to reset a Ford window regulator

If we are experiencing malfunctions in the other electric windows of our car, perhaps after replacing the battery or the system does not recognize the position of the glass. We can follow the instructions below and help us with the video to carry out the reset. First, access the passenger compartment and sit in the driver's seat and close the hatch. Then press the opening control in the glass until it goes down completely and hold it down for another 3 seconds then make the glass go up and close it completely, keep the control pressed for a few seconds and repeat this procedure twice. This way the system should have completed its learning cycle and the problem should be solved.


Posted on 26 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - How does the power window work? Read Answer
    • Vari - What can be the problems of a side glass that doesn't lift? Read Answer
    • Vari - How much does it cost to replace the side window of a car? Read Answer
    • Vari - Why doesn't the car window go up anymore? Read Answer
    • Vari - What is the fuse of the car windows? Read Answer
    • Vari - How much does it cost to darken the car windows? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos