Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Hyundai I45?

Model: Hyundai Hyundai Various
Part: Headlight bulb

If one of the bulbs in the front headlight of your Hyundai i45 has suddenly stopped working and you want to find out how to replace it quickly and safely, then all you have to do is read the following guide carefully and follow the steps. First of all, turn off the car and let the engine compartment cool down for a few minutes. Then, lift the front hood and position yourself in front of the headlight that contains the faulty bulb. Remove the protective cap and detach the bulb holder after disconnecting the electrical cable. Finally, replace the old bulb with a new one.


Posted on 6 July 2023 by ScegliAuto



How to replace the front headlight bulb of the Hyundai Azera?
Hyundai Hyundai Various In this new guide of ours, we will discover together how to replace the front headlight bulb of your Hyundai Azera (2012-2017). The entire procedure
How to replace Hyundai Reina headlight bulbs
Hyundai Hyundai Various Today we will see, in this video tutorial, how to remove and replace the headlight bulbs of the Hyundai Reina. First of all, we open the bonnet of ou
Disassembly of the rear cabin ceiling light bulb of the Hyundai Veracruz.
Hyundai Hyundai Various Today's instructions will show us how to disassemble and replace the bulb of the rear ceiling light in the Hyundai Veracruz. First, let's get inside

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos