Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to disassemble the rear door panel in the Geely Coolray?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Door panel
Operation: How to disassemble the rear door panel in the Geely Coolray?

As we can see in this tutorial, removing the rear door panel in the Geely Coolray is an extremely simple and fast operation. First, let's go inside the car, then remove the bottom of the small upper storage compartment. Next, unscrew the screw that was just released with a screwdriver with a cross tip, detach the front cover of the handle and remove the additional bolts. At this point, all that's left is to remove the last screw located inside the opening handle, separate the panel from the door, and disconnect the various connectors.


Posted on 15 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - How to disconnect the car door electric cable? Read Answer
    • Vari - How do you remove the interior trim of a door? Read Answer
    • Vari - What to do if the rear door does not open? Read Answer
    • Vari - What to do if the car door does not close? Read Answer
    • Vari - How do you remove a door panel? Read Answer
    • Vari - Where to find replacement door panels? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos