Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
- Years 2014-2022 Let's see how to reset the AdBlue warning light without having to restart the engine. We will operate by accessing the ECM through our tablet and reading the error from the EOBD socket. From the chart, we read error code P20, which is a service action on the emissions control circuit. We will reset the system by pressing "OK" with the engine off. Now we also turn off the ignition. We wait for about ten seconds, then we can turn on the ignition again. This should solve the problem, but let's check the instrumentation. Indeed, the AdBlue warning light is off, and the message that said there were only 100 miles of range left has disappeared. It is also possible to remove the error by accessing the AdBlue menu and resetting it from there.
Posted on 16 August 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.057
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |