Do it yourself
Frequently asked questions about cars and motorcycles

Reasons to check the timing belt before the replacement interval.

Model: (Various brands) Various
Part: Timing belt

Even if we are far from the recommended timing belt replacement interval set by the car manufacturer, it's not a bad idea to take a look at the timing belt. In this video, we can see why: perhaps the water pump bushing has worn out and is leaking limescale, which can prematurely damage the belt. Or maybe the tensioner bearing is showing signs of grease leakage, indicating premature wear compared to normal. Therefore, when servicing the car, especially after reaching 100,000 km, it's better to loosen the belt cover to have a look. Even the car manufacturers state that the belt should be replaced at 200,000 km or after 10 years, and it's always mentioned that regular checks are necessary. The belt shown in the video, if not checked, would have definitely snapped, causing serious (and expensive) engine damage.


Posted on 26 October 2023 by ScegliAuto



Reasons why it is important to check the timing belt even if you have not reached the recommended time or mileage interval.
(Various brands) Various In this video, we see why it is important to check the timing belt even if we are quite far from the mileage or time limit indicated by the manufactu
Five signs of wear on the timing belt
(Various brands) Various There are five signs that our timing belt sends us to tell us it's worn out, and that we shouldn't ignore - let's see what they are. Before doing the
When to replace the timing belt
(Various brands) Various In this cute cartoon, we are given specific instructions on when to change the timing belt of our car; it is not easy to understand, but over time th

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos