Do it yourself
Frequently asked questions about cars and motorcycles

How to Find a Blown Fuse with a Special Tool

Model: (Various brands) Various
Part: Fuse box

In this video, you will see how to find a blown fuse by testing them one by one in the engine fuse box or in the cabin fuse box; this is done using a special tool that lights up in various ways to indicate whether the fuse is in good condition or faulty. This device can be easily found on e-commerce sites. For example, on Amazon, you can find this tester with the code B001ILFAOQ for £6.72, with free delivery for Prime customers. Connect the clip to earth and test it on the positive side, where the light will illuminate. There are three possible outcomes: if it lights up on both sides, the fuse is good; if nothing lights up, the fuse is blown. If the light only illuminates on one side of the fuse, it means that it is defective. As you can see, the fuses have two small metal parts on the back: these are the points you need to touch. To remove it, you will need the special tweezers, and you will use the same tool to fit a new one back in place. Fuses should be replaced with a rated current equal to or lower than that of the one you removed.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various There are various methods to identify a blown fuse. The video shows how to check if the filament is broken, if there is a small gap, or if the plasti…
(Various brands) Various The air conditioning in a vehicle can stop working due to various issues such as a blown fuse or a blocked pipe. In these two cases, simply replace t…
(Various brands) Various In this video we can see how to check the status of fuses using a screwdriver-shaped voltage tester, which can be easily found online, for example on…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where to find the fuses of the Yamaha T-max 530 DX? Read answer
    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos