Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to disassemble the front headlight of the Fiat Dakota

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Headlight
Operation: How to disassemble the front headlight of the Fiat Dakota

To disassemble the front headlight of your Fiat Dakota by yourself, you just need to follow these simple steps. First of all, make sure the vehicle is completely turned off and safely parked on a flat surface, then lift the front hood and use a specific key to unscrew all the various screws that hold the headlight in place. After completing this simple operation, all you have to do is pull the headlight outwards and disconnect the electrical cable located at the back to complete the disassembly procedure.


Posted on 30 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - How do you replace the front headlight of the Kymco Downtown 300? Read Answer
    • Vari - How do you adjust the front light on the Vespa Gts? Read Answer
    • Vari - What is the correct position of a led light? Read Answer
    • Vari - How to replace the headlight bulbs on the Kymco Agility R16 +? Read Answer
    • Vari - How to change the front bulbs of the Piaggio Beverly 250? Read Answer
    • Vari - How to open the car headlight? Read Answer
    • Vari - When does code 21 appear in Opel? Read Answer
    • Vari - What does code 18 mean in the Vauxhall Adam? Read Answer
    • Vari - What to do if the headlight bulb holder retainer no longer holds? Read Answer
    • Vari - What does the "AFS" light on my car mean? Read Answer
    • Vari - How do you disassemble the headlight of a Suzuky Gsr 600? Read Answer
    • Vari - Position light replacement: how much does it cost? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos