Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Properly Install a LED Bulb

Model: (Various brands) Various
Part: Light bulb

Video tutorial

In this video, we will cover what may seem like a trivial task, namely how to correctly install a LED bulb. It is important to note that this task may appear simple, but it can be easy to install incorrectly; first, remember to purchase Canbus LED bulbs, which have an integrated resistor, to avoid any issues with the vehicle's control unit.

Otherwise, you will need to use specific decoders that bypass the system, which can be installed later. With that established, remove the rear spring and take off the ring from the LED bulb, insert it into the housing, reattach the spring, and only then place the bulb back, ensuring the part with the electrical wire is at the bottom.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Properly Install an H7 LED Bulb
(Various brands) Various In this short video, we can see the correct way to install an H7 LED bulb: first, remove the halogen bulb from its housing by turning it counterclock…
How to Install H7 Bulbs
How to Install H7 Bulbs
(Various brands) Various In this video, see how to install H7 bulbs correctly: first, to remove the bulb, unlock the spring and pull out the H7 halogen bulb. To insert the LE…
Differences Between Xenon and LED Headlights
Differences Between Xenon and LED Headlights
(Various brands) Various What is the difference between Xenon lamps and LED lamps? The aim is to get as close as possible to a light that resembles midday sunlight; LEDs come…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos