Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to change the battery in a TPMS sensor

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Checks and maintenance
Operation: How to change the battery in a TPMS sensor

In this video we can see how an action that we have always considered impossible - such as changing the battery in a TPMS sensor - is actually feasible. They are not easy to remove because we have to separate the wheel from the tire using a specific tool. The youtuber shows us the tools we need to perform this operation. The device weighs 43 grams, and it is necessary to know this parameter because it affects the balance of the wheel. We start by removing the valve core, then the nut, the rubber sealing ring, the fixing washer, and with a mini screwdriver we remove the fixing screw on the outer side of the valve stem, which will come off immediately after. We open the cover and with a sharp blade we remove the silicone protection, until we uncover the battery which is held by a metal spring. We lever it up; we will find a second tab also on the bottom side. It is a 2450 battery; we replace it, resolder the upper clamp and seal it with silicone. We close the cover. We put back the fixing screw and all the other accessories we had removed, following the opposite direction. We check the weight, which must be the same: 43 grams and then put it back into the tire with the same tool we used to remove it. Something that seemed impossible to us, we have actually done it!


Posted on 14 May 2024 by ScegliAuto



How to replace the TPMS valve and reset the instrument cluster light
(Various brands) Various In this video we will show you how to replace the TPMS valve and reset the instrument cluster light. Insert the diagnostic device into the EOBD socke
How to replace TPMS sensors on a tire with minimal tools
(Various brands) Various In this video we see how to replace the TMPS sensor of a tire, without having large equipment, but with very minimal tools. The first thing to do is
How to change the battery in the tire pressure sensor
(Various brands) Various In this video, we see how it is possible to replace the battery in the wheel sensor of a motorcycle. It is a common CR2032 battery, but with pins to

    Frequently Asked Questions

    • Vari - What does it mean when the "Hill Hold Control" system is not available? Read Answer
    • Vari - What does x100 mean? Read Answer
    • Vari - Why is the trunk of the Mercedes locked? Read Answer
    • Vari - What does the illuminated ABS light indicate on the Kymco Downtown 300I? Read Answer
    • Vari - When does the message SRS FAULT VISIT WORKSHOP appear in Mercedes cars? Read Answer
    • Vari - What does the spring-shaped indicator light indicate? Read Answer
    • Vari - What does the glow plug indicator on Mercedes indicate? Read Answer
    • Vari - What do the red lights on Harley Davidsons indicate? Read Answer
    • Vari - Why is the fuel cap locked? Read Answer
    • Vari - What does code 84 mean in Opel? Read Answer
    • Vari - What should you do if the remote control of a Volkswagen car is not working? Read Answer
    • Vari - What is the position of the oil drain plug in the Yamaha YZ450GF? Read Answer
    • Vari - Why does the engine malfunction light turn on in the Piaggio Vespa GTS 300? Read Answer
    • Vari - What does the term "Passive entry" in Jeeps indicate? Read Answer
    • Vari - What does the Service light on the MG 6 indicate? Read Answer
    • Vari - What does the EDC warning light indicate in an Iveco vehicle? Read Answer
    • Vari - What problems does the Piaggio MP3 400 have? Read Answer
    • Vari - How often should the Ducati Scrambler be serviced? Read Answer
    • Vari - What is the cost of a service for the Yamaha Majesty 400? Read Answer
    • Vari 2019-2026 - Why won't the Fitbit Versa dashboard turn on? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos