Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the nozzles of the car's windshield washer

Model: (Various brands) Various

When the nozzles for the windshield washer fluid are clogged with dirt, it is not necessarily necessary to replace them; today we will explain a simple, inexpensive and quick method to clean them without too many problems. All you will need for cleaning is a safety pin. Proceed by inserting the pin into each individual hole and occasionally press the button for the water to come out to check that the process is going well. Once the process is finished, you can fill the reservoir with water and hit the road if necessary.

Posted on 10 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Properly Clean the Windscreen Washer Nozzles
How to Properly Clean the Windscreen Washer Nozzles
(Various brands) Various If the windscreen washer nozzle on your car is blocked, the best way to clean it is not to poke it with a pin, as this can not only fail to clean it …
Antifreeze for the Windscreen Washer Reservoir
Antifreeze for the Windscreen Washer Reservoir
(Various brands) Various It is common to fill the windscreen washer reservoir with just water, which is a mistake for several reasons: - Water does not provide adequate clean…
How to Fix Windscreen Washers That Spray Little
How to Fix Windscreen Washers That Spray Little
(Various brands) Various To fix the nozzles that spray little, the first step is to check that there is enough properly diluted fluid (50% demineralised water, 50% detergent)…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos