Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob on Renault and Dacia vehicles

Model: (Various brands) Various
Part: Shift knob

To replace the gear knob on Renault and Dacia vehicles, we need to put the gear in neutral and then lift the gear lever boot using a flathead screwdriver. Then we need to rotate the knob and lift it by pulling upwards. Be careful during this maneuver not to break the internal mechanism of the gear lever. The replacement can be purchased in a kit including the boot and screws on auto parts resale websites as well as on sales websites and in physical stores in your city. The installation of the knob alone is done by inserting the knob and rotating it gently.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to install the gear lever knob on Peugeot and Citroen vehicles
How to install the gear lever knob on Peugeot and Citroen vehicles
(Various brands) Various Today we will explain how to install the gear shift knob on Peugeot or Citroen vehicles. After removing the gear shift knob from its housing, we inst…
How to replace the gear knob of Peugeot and Citroen vehicles
How to replace the gear knob of Peugeot and Citroen vehicles
(Various brands) Various Today we will explain how to replace the gear knob on Peugeot and Citroën vehicles. To perform this simple operation, we need to use a needle-nose pl…
How to remove the gear knob of the car
How to remove the gear knob of the car
(Various brands) Various Today we will explain how to replace the gear knob of the car in a simple and fast way. The steps explained in the video tutorial can be performed on…

    Frequently Asked Questions

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos