Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Gear Gaiter on Peugeot and Citroen Vehicles

Model: (Various brands) Various
Part: Shifter boot

Video tutorial

Today, we will explain how to install the gear gaiter on Peugeot or Citroen vehicles. After removing the gear lever from its housing, install the support and insert the new fabric into the rigid plastic base.

Place a hose clip at the base of the gear knob to secure the vehicle's gear lever. Mount the support onto the rigid base of the centre console.

Before entering traffic, it is essential to use the gear lever. If you wish to change the knob as well, simply pull it out and insert the new cap directly onto the shaft.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on Renault and Dacia Vehicles
How to Replace the Gear Knob on Renault and Dacia Vehicles
(Various brands) Various To replace the gear knob on Renault and Dacia vehicles, position the gear lever in neutral and then lift the gear gaiter using a flat-head screwdrive…
How to replace the gear knob of Peugeot and Citroen vehicles
How to replace the gear knob of Peugeot and Citroen vehicles
(Various brands) Various Today we will explain how to replace the gear knob on Peugeot and Citroën vehicles. To perform this simple operation, we need to use a needle-nose pl…
How to Remove the Gear Lever Gaiter
How to Remove the Gear Lever Gaiter
(Various brands) Various Is the gear gaiter damaged? Let's look at removing the knob and then how to remove the gaiter. Take the knob in your hands and rotate it left and rig…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos