Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Gear Lever Gaiter

Model: (Various brands) Various
Part: Shifter boot

Video tutorial

Is the gear gaiter damaged? Let's look at removing the knob and then how to remove the gaiter. Take the knob in your hands and rotate it left and right until you can remove it from the gear stick.

Use a plastic lever to detach the frame of the leather gaiter: disconnect the plastic that secures the gaiter to the stick. Fit the gaiter over the stick, then take the new knob and slide it onto the stick in the centre console until it is tightened fully.

Ensure the correct assembly of the gaiter and gear knob pieces.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

(Various brands) Various If our car is a bit old and has a lot of kilometers on the odometer, it is likely that the gear lever has some play, so much so that it "rocks" witho…
(Various brands) Various Today we will explain how to replace the gear knob on Peugeot and Citroën vehicles. To perform this simple operation, we need to use a needle-nose pl…
(Various brands) Various If you have personally changed the engine oil and filter on this scooter model, you need to finish the job by resetting the oil change light on the d…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos