Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Atlas Terramont - Air filter

Air Filter Volkswagen Atlas Terramont (2017-2025 / mk 1)

Volkswagen Atlas Terramont (2017-2025 / MK 1)
How to replace the air filter of the Volkswagen Atlas
If you own a Volkswagen Atlas and want to replace the engine air filter yourself, all you have to do is follow the following procedure. First, lift the front …Read all…
Posted on 9 January 2025 by ScegliAuto
Volkswagen Atlas Terramont (2017-2025 / MK 1)
Find a DIY Video for Volkswagen Atlas Terramont
To proceed with replacing the air filter on the vehicle, follow these simple steps: open the hood and identify the air filter housing located above the engine. …Read all…
Posted on 6 September 2026 by ScegliAuto
Volkswagen Atlas Terramont (2017-2025 / MK 1)
How to Replace the Air Filter on a Volkswagen Atlas
If you want to change the engine oil and the corresponding filter yourself, follow the instructions in this tutorial and refer to the video. The first thing to …Read all…
Posted on 17 July 2026 by ScegliAuto
Roof rack bars (1) Battery (3) Spark plugs (2) Key (21) Onboard computer (1) Checks and maintenance (12) Headlight (1) Fog lights (1) Air filter (3) Cabin air filter (7) Accessory kit (1) Headlight bulb (1) Clock (12) Door trim panel (1) Car door (1) Push button (1) Wheel (1) Fuse box (17) Side mirror (1) Warning light – error code (10) (15) Tire pressure warning light (2) Service warning light (45) Fuel cap (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos