Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Caddy
    4. : Diesel filter

Volkswagen Caddy - Diesel filter

Volkswagen Caddy (2003-2020 / MK 3, 2K)
Replacement of the fuel filter of the Volkswagen Caddy 1.6 TDI
Today's instructions will show us how to disassemble and replace the diesel filter of the Volkswagen Caddy 1.6 TDI, in simple steps. First, we open the engine …read all…
Posted on 6 March 2024 by ScegliAuto
Volkswagen Caddy (2003-2020 / MK 3, 2K)
How to replace the fuel filter of the Volkswagen Caddy.
Briefly, we will see the instructions that will allow us to disassemble and replace the diesel fuel filter of the Volkswagen Caddy. First, we open the engine …read all…
Posted on 15 February 2024 by ScegliAuto
Volkswagen Caddy (2003-2020 / MK 3, 2K)
Replacing the diesel filter on Vw Caddy
Do we want to replace the diesel filter of a Vw Caddy? Let's see how the filter with attached parts is disassembled. We lift the front hood of the car, then we …read all…
Posted on 16 February 2024 by ScegliAuto
Airbags (1) Car stereo (4) Roof Rack Bars (1) Arm (1) Spark plugs (1) Glow plugs (1) Bodywork (1) Timing belt (4) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (71) Drive shaft boot (1) Headlight (2) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (7) Petrol filter (1) Diesel filter (3) Headlight bulb (3) Rear light bulb (5) Handle (2) Door panel (6) Tires (2) Instrument cluster (18) Fuse box (26) Seat (2) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos