Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Caddy
  6. : Timing belt

Volkswagen Caddy - Timing belt

Volkswagen Caddy (2003-2020 / MK 3, 2K)
Guide to replacing the timing belt of the Volkswagen Caddy 2.0 TDI.

Below we will see the main steps that will allow us to disassemble and replace the timing belt of the Volkswagen Caddy 2.0 TDI. First of all, we open the …read all…
Posted on 12 November 2023 by ScegliAuto
Volkswagen Caddy (2003-2020 / MK 3, 2K)
How to change the timing belt of the Volkswagen Caddy 2.0 TDI

In this guide we will see the main steps to be able to remove and replace the timing belt of the Volkswagen Caddy 2.0 TDI, from 2017. First we open the engine …read all…
Posted on 30 June 2022 by ScegliAuto
Volkswagen Caddy (2003-2020 / MK 3, 2K)
How to replace the timing belt on Volkswagen Caddy 1.6 TDI?

To be able to replace the timing belt of the Volkswagen Caddy 1.6 TDI it is necessary to first remove some obstructions inside the engine compartment, such as …read all…
Posted on 24 February 2024 by ScegliAuto
Volkswagen Caddy (2003-2020 / MK 3, 2K)
How to install the timing belt tensioner on VW Caddy

When replacing the timing belt, in addition to observing all the necessary recommendations on fixing the timing references, it is certainly important to change …read all…
Posted on 17 September 2023 by ScegliAuto

Airbags (1) Car stereo (4) Roof Rack Bars (1) Arm (1) Spark plugs (1) Glow plugs (1) Bodywork (1) Timing belt (4) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (71) Drive shaft boot (1) Headlight (2) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (7) Petrol filter (1) Diesel filter (3) Headlight bulb (3) Rear light bulb (5) Handle (2) Door panel (6) Tires (2) Instrument cluster (18) Fuse box (26) Seat (2) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos