Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Timing Belt on the Volkswagen Caddy 2.0 TDI

Model: Volkswagen Caddy MK 3, 2K - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Follow the main steps to remove and replace the timing belt on the Volkswagen Caddy 2.0 TDI. First, open the bonnet of your car and start by removing the engine mount; then raise the vehicle and remove the front right wheel, subsequently taking off the auxiliary belt and the crankshaft pulley, as shown in the video.

At this point, remove the timing cover to access the belt, taking the necessary references for replacement, following the video tutorial to the end!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / MK 3, 2K) Let's see the main steps that will allow you to disassemble and replace the timing belt of the Volkswagen Caddy 1.6 TDI. First, open the vehicle's bo…
Volkswagen Caddy (2003-2020 / MK 3, 2K) This guide shows the procedure for removing and replacing the timing belt on the Volkswagen Caddy 1.6 TDI. First, open the bonnet of the vehicle and …
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this guide, follow the main steps to remove and replace the timing belt on a 2017 Volkswagen Caddy 2.0 TDI. First, open the bonnet and start by re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos