Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Taigo
    4. : Checks and maintenance

Volkswagen Taigo - Checks and maintenance

Checks And Maintenance Volkswagen Taigo (2020-2027 / mk 1)

Volkswagen Taigo (2020-2026 / MK 1)
How to Reset the Trip Meter on the Volkswagen Taigo
This guide shows the steps to reset the trip meter on the Volkswagen Taigo. First, get in the vehicle and start the ignition; go to the settings and trip data …Read all…
Posted on 25 April 2026 by ScegliAuto
Volkswagen Taigo (2020-2026 / MK 1)
How do you install the rear camera of the Volkswagen Taigo?
In order to install the rear camera of the Volkswagen Taigo, you will first need to connect the device's cables to the central infotainment screen: to do this, …Read all…
Posted on 18 October 2025 by ScegliAuto
Volkswagen Taigo (2020-2026 / MK 1)
How do you reset the partial odometer of the Volkswagen?
In order to reset the partial odometer of the Volkswagen Taigo, you need to turn on the instrument panel by inserting the key into its ignition block: once …Read all…
Posted on 16 October 2024 by ScegliAuto
Volkswagen Taigo (2020-2026 / MK 1)
How to Disable Lane Assist on the Volkswagen Taigo?
To disable Lane Assist on the Volkswagen Taigo, turn on the instrument panel by pressing the specific button next to the steering column: then press the button …Read all…
Posted on 14 August 2026 by ScegliAuto
Body (1) Key (2) Onboard computer (1) Checks and maintenance (4) Fuse box (5) (1) Service warning light (11) Windshield wipers (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos