Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radio in the Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in the Volkswagen Golf, use a tool to pry off the trim surrounding the device: once the trim is removed, you will be able to locate the screws underneath that secure the device in place. All these screws must be fully loosened so that you can pull the radio out of its housing and disconnect the connectors at the back.

Once removed, you can insert the new radio, securing it and connecting it properly to its housing.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Remove the Standard Radio from a Volkswagen Golf
How to Remove the Standard Radio from a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Follow these simple and quick steps to remove and replace the standard radio from a Volkswagen Golf. First, get inside the vehicle; to extract the ra…
How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
How to Remove the Radio from a Volkswagen Golf 6
How to Remove the Radio from a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If you are experiencing issues with the radio in your Volkswagen Golf Mk6 or simply want to replace it with a new model, this guide is all you need. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos