|
Do it yourself
| |||
| ||||
How do you reset the Service light on the Volkswagen Polo?
Model: Volkswagen Polo
MK IV, Polo IV, Polo 4, MK 4, 9N
- Years 2001-2009
On the Volkswagen Polo, the operation of resetting the Service light involves holding down the button located on the right side of the instrument panel while it is turned off. By keeping this button pressed, you can insert the ignition key into the appropriate slot, turning it and turning on the instrument panel. Once the instrument panel is turned on, you will need to wait a few seconds while continuing to hold down the button. When the light is reset, you can release the button, turning off and on the instrument panel to verify that the reset has occurred.
Posted on 12 September 2024 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2017-2025 /
Polo VI, Polo 6, MK 6, AW1, MK VI)
This tutorial shows the procedure to reset the service light on a Volkswagen Polo. This is useful if the light remains on even after performing the s…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
Volkswagen Polo
(2017-2025 /
Polo VI, Polo 6, MK 6, AW1, MK VI)
To reset the Service light on a Volkswagen Polo, you need to turn on the instrument cluster so you can navigate through the menu options on the onboa…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.146
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
