Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Volkswagen Polo

Model: Volkswagen Polo AW1, MK 6, Polo VI, Polo 6, MK VI - Years 2017-2025
Part:

You can completely eliminate the tyre pressure light on the Volkswagen Polo by inflating the tyres until they reach the recommended pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once all tyres are at the correct pressure, activate the instrument panel and press the CAR button located next to the central display on the dashboard. Then select "Setup" and then "Tyres". To make the light disappear from the instrument panel, select "SET" to finish.

Posted on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / AW1, MK 6, Polo VI, Polo 6, MK VI) In order to reset the tire pressure warning light of the Volkswagen Polo, you need to inflate the tires to the correct pressure value: once they are …
How to reset the tire pressure sensor of the Volkswagen Polo
How to reset the tire pressure sensor of the Volkswagen Polo
Volkswagen Polo (2017-2025 / AW1, MK 6, Polo VI, Polo 6, MK VI) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset…
How to reset the tyre pressure warning light on the Volkswagen Polo
How to reset the tyre pressure warning light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / AW1, MK 6, Polo VI, Polo 6, MK VI) In this video, we will see the procedure necessary to reset the tyre pressure warning light (TPMS) on the Volkswagen Polo; before performing the rese…

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos