Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell of the Volkswagen Polo

Model: Volkswagen Polo Polo V, Polo 5, MK 5, MK V, 6R - Years 2009-2017
Part: Key

Today, we will see the instructions on how to disassemble and replace the shell and remote of the Volkswagen Polo key. First, take your remote and start by removing the pin located inside the key slot; then remove the plastic rear cover to access the battery, prying the sides to open the remote into two parts. At this point, remove the electronic board, the transponder, and the key mechanism, transferring everything to the new shell; install all the remote elements correctly and in order.

Posted on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the engine control unit located in the Volkswagen Polo?
Where is the engine control unit located in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo V, Polo 5, MK 5, MK V, 6R) In this video, we can see where the engine control unit is located in the Volkswagen Polo, which is useful in case we need to replace it due to a mal…
Where are the fuses located in the Volkswagen Polo?
Where are the fuses located in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo V, Polo 5, MK 5, MK V, 6R) In the Volkswagen Polo, you will find two boxes that contain all the fuses: the first is located inside the dashboard, in the central part just below…
How to Replace the Fuses in a Volkswagen Polo
How to Replace the Fuses in a Volkswagen Polo
Volkswagen Polo (2001-2009 / Polo IV, Polo 4, 9N, MK IV, MK 4) How to replace the fuses located in the dedicated box of a Volkswagen Polo? Open the cover and check for any anomalies indicated on the instrument pa…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Why is my Volkswagen Polo key not detected? Read answer

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos