Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in a Volkswagen Touran?

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear seats in a Volkswagen Touran, a very simple and quick operation. First, open the boot.

Then, lift the floor panel and, using a 10 mm socket, undo the four indicated plastic bolts. Next, remove the entire glove compartment, undo the two central bolts with a 16 mm spanner, and proceed with the lower front bolts.

At this point, simply extract the seats from the cabin, position any replacements, and refit them by following the reverse procedure.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front and Rear Seats of the Volkswagen Touran
How to Remove the Front and Rear Seats of the Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) This guide explains the procedure for removing the front and rear seats of the Volkswagen Touran. First, open the front and rear doors and start by r…
How to Replace the Fuel Pump on a Volkswagen Touran?
How to Replace the Fuel Pump on a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To replace the fuel pump on a Volkswagen Touran, lift the rear seats by pulling the lever located on the side of the seat and then grasping the handl…
Removing the Front Seats from a Volkswagen Touran
Removing the Front Seats from a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) To remove the front seats from a Volkswagen Touran, first position the vehicle on a flat surface or on a ramp for safe working. Disconnect the batter…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos