Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light Bulb in the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Interior dome light bulb

See other generations:
Video tutorial

Below are the instructions that will allow you to remove and replace the interior light bulbs in the Volkswagen Tiguan. First, get into the vehicle and start removing the light console from the ceiling, prying at the sides with something thin and pointed; then disconnect the electrical connector of the bulb, as shown in the video.

At this point, replace the bulb with a new one of the correct type and with the same fitting; then reassemble the light console, applying the same procedure for replacing all other interior lights!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to disassemble and replace the interior light fixture of the Volkswagen Tiguan
How to disassemble and replace the interior light fixture of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the interior light fixture and its bulbs of the Volks…
Replacing Interior Lights on a Volkswagen Tiguan
Replacing Interior Lights on a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Removing the rear interior light to replace the bulbs is a very quick and simple procedure on the Volkswagen Tiguan. Obtain a plastic wedge or, at a …
Removing the Interior Light Fittings on a Volkswagen Tiguan 1
Removing the Interior Light Fittings on a Volkswagen Tiguan 1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this video tutorial, you will see how to remove the interior light fittings, replacing the bulbs, on the first series Volkswagen Tiguan. First, ge…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos