|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Volkswagen Golf?
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019
To reset the "Service" light on a Volkswagen Golf, follow these steps. Start with the instrument panel turned off. Press and hold the button located under the instrument panel, usually marked with "0.0" or "SET". While holding down the button, turn on the instrument panel without starting the engine. Continue to hold the button until a message appears on the instrument panel display indicating that the reset is in progress. At that point, the "Service" light should turn off. You may need to confirm the reset by pressing the button again or using the steering wheel controls, depending on the specific model of your Golf. Once the reset is complete, turn off the instrument panel and then turn it back on to verify that the "Service" light has indeed been reset. If the light does not turn off, repeat the procedure carefully, making sure to follow each step correctly. This process ensures that the vehicle maintenance system is up to date and that you can properly monitor future service intervals.
Posted on 25 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
To reset the "Service" light on a Volkswagen Golf, turn on the instrument panel without starting the engine. Use the controls on the steering wheel t…
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
Before you start, sit in the driver's seat of your Volkswagen Golf. Begin by pressing and holding the right button on the instrument cluster while ac…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
To reset the "Service" light on a Volkswagen Golf, start by turning on the instrument panel without starting the engine. Press and hold the button lo…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.134
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |