Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the emergency lights switch on the Volkswagen Golf MK7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this video we see how to change the hazard light button on the Volkswagen Golf MK7: remember to do this operation with the ignition off, as the button also involves the airbag light. According to the manual, it should be enough to grab it with your fingers and pull it forcefully to remove it from its housing, but the youtuber confesses to not having succeeded and suggests using a pointed tool - which we will use with caution - to remove the button from its housing. Now we can remove it with our hands, and disconnect the electrical connectors behind it. We can find the piece, for example, on ambiponto.com with the code 20227029 at a price of 20.66 euros + shipping costs (not specified).

Posted on 29 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Let's see how to remove the hazard light switch on the Volkswagen Golf MK4: this is a simple and quick task, there is no need to dismantle the dashbo…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Here are the instructions to remove and replace the light switch or stalk switch on the Volkswagen Golf. First, get inside the vehicle and start remo…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below we will see the steps that will allow us to disassemble and repair the light button of the overhead light of the Volkswagen Golf. First of all,…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos