Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the interior lining of the Volkswagen Passat roof

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

Today's instructions will show us the process of disassembling and replacing the headliner or the interior roof lining of the Volkswagen Passat. First, we open the vehicle doors and begin to disassemble and remove roof elements such as grab handles, sun visors, and interior lights, unscrewing all fastening screws and disconnecting various electrical connectors; we then also remove the plastic side pillars, as shown in the video.

At this point, we lever on the sides of the headliner to detach and remove it completely, following the video tutorial until the end!


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Replace the Headlining in a Volkswagen Passat
How to Replace the Headlining in a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) This guide briefly explains the instructions needed to dismantle and replace the headlining in a Volkswagen Passat. First, get into the vehicle and s…
How to Remove the Roof Lining of a Volkswagen Passat
How to Remove the Roof Lining of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…
How to Replace the Panoramic Roof on a Volkswagen Passat
How to Replace the Panoramic Roof on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) You can replace the panoramic roof on a Volkswagen Passat by prying off all the trim panels of the door pillars with a tool. This will also allow you…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos