Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" indicator on a Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Service warning light

To reset the "Service" light on a Volkswagen Polo, turn on the instrument panel without starting the engine. Locate the button positioned under the control panel, used to interact with the system. Press and hold it until the menu related to scheduled maintenance appears. Once inside this menu, use the button to navigate through the options and select the setting dedicated to resetting the service. Confirm the operation by pressing again and holding the pressure for a few seconds. The system will record the reset, removing the warning from the display. To verify the success of the procedure, turn off and on the instrument panel, making sure the light is no longer visible. In this way, the vehicle will be ready to properly monitor the next maintenance interval, without any remaining notifications.

Posted on 20 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Follow the procedure to reset the oil change service light on your Volkswagen Polo. First, get into the vehicle and press and hold the button located…
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Below we will see the steps that will allow us to reset the maintenance service light of the Volkswagen Polo. First of all, we get on board the car a…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Here’s how to reset the service light on a Volkswagen Polo. To reset the maintenance service light, turn on the vehicle's instrument cluster, use the…

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos