|
Do it yourself
| |||
| ||||
How to change the radio of the Volkswagen Polo MK3 with a 2DIN
Model: Volkswagen Polo
MK III, Polo III, Polo 3, MK 3, 6N
- Years 1994-2003
In this quick video, we see how easy it is to change the stock radio of a Volkswagen Polo with a 2DIN: we start by removing the top part of the dashboard, which is just snapped in, then we unscrew the screws that are exposed, remove the trim of the air conditioning controls (using a plastic spatula) and remove the screws found underneath, so that we can remove the radio unit. We disconnect the electrical connectors and the antenna, and then remove the two components located on the sides of the unit; we unscrew the radio unit holder from the inside, also removing the air vents and the buttons underneath. We do not provide information on purchasing the new radio unit: there are so many options available, for all tastes and budgets, that our suggestion would be pointless. We clean the screen in place of the radio unit slot and the storage compartment below - after reconnecting all the electrical connectors - and then reassemble the trim with the air vents and the upper storage compartment. We screw back the air conditioning controls and its trim: some of the physical buttons that we lost will be found in the touchscreen display.
Posted on 23 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
In this video tutorial, you can see how to reactivate your radio by following a few simple steps that will guide you towards proper management of you…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Remove the radio from the Volkswagen Polo if it is damaged or if you want to change it. Use a plastic lever to remove the radio trim (without damagin…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Good morning! The goal today is to completely reset the radio settings of your Volkswagen Polo. Start by sitting in the driver's seat. Next, turn on …
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.206
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |