Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the turn signal bulb of the Volkswagen Passat mirror

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Side marker bulb

See other generations:
Video tutorial

The information provided in this guide will show us how to disassemble and replace the turn signal bulb in the mirror of the Volkswagen Passat. First, let's move to the side of the mirror and start removing the mirror cover, levering on the sides; then disconnect the turn signal light of the mirror, disconnecting the electrical connector, as shown in the video.

At this point, install the new turn signal light, making the connection and checking the operation; finally, reassemble the plastic cover of the rearview mirror.


Posted on 8 August 2025 by ScegliAuto


Related tutorials

Replacing the Front Indicator Bulb on a Volkswagen Passat
Replacing the Front Indicator Bulb on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Today, learn how to remove and replace the front indicator bulb on a Volkswagen Passat. First, move to the front of the vehicle and start by removing…
How to Replace the Front Indicator Bulb on a Volkswagen Passat
How to Replace the Front Indicator Bulb on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) To replace the front indicator bulb on your Volkswagen Passat, apply the same procedure required for all other front headlight bulbs. Follow the step…
Replacing the Front Indicator Bulb on Volkswagen Passat
Replacing the Front Indicator Bulb on Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) On the Volkswagen Passat B6, the front indicator lamp is located at the bottom of the bumper, above the lower grille. Inside this grille, you will se…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos