Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the inner lining of a front door of a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

The procedure to dismantle the inner panel of a front door of a Volkswagen Golf car requires a crosshead screwdriver, a torx screwdriver, and a plastic lever to help you remove the panel. Start by using the plastic lever to remove the handle cover and then unscrew the torx screws located under the cover.

Remove the torx screws along the bottom edge and on the sides of the panel, and gently lever along the edges with the plastic lever to release the panel from the clips. At this point, lift the panel upwards to release it from the upper edge of the door.

Disconnect the window lifter connector and other connected wiring.


Posted on 6 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Door Lock on a Volkswagen Golf
How to Replace the Front Door Lock on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Follow these simple steps to remove and replace the front door lock on a Volkswagen Golf. First, open the front door of the vehicle and start by remo…
How to remove the internal door handle of the Volkswagen Golf
How to remove the internal door handle of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Briefly, here are the instructions that will allow you to remove and replace the internal door handle of the front door of the Volkswagen Golf, as we…
How to remove the front door panel of the Volkswagen Golf
How to remove the front door panel of the Volkswagen Golf
Volkswagen Golf (1983-1992 / Golf 2, MK 2) Below we will discover the necessary information on how to disassemble and remove the front door panel of the Volkswagen Golf. First, we open the fro…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos