Do it yourself
Frequently asked questions about cars and motorcycles

Repair of the windshield washer tube of the Volkswagen Polo 9n

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

In this video, we see how to make a makeshift but effective repair on the tube that carries the windshield washer fluid of a Volkswagen Polo 9n. The tube had broken due to old age, right at the point where it had bent, and was leaking, preventing the glass from being cleaned. The youtuber repaired it properly by removing the damaged part and inserting another tube for compressed air, of a smaller diameter and much longer than the part to be repaired, in order to join the two still good sides of the tube. A pass of hot glue then definitively closed the problem.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this guide, we will provide the instructions that will allow us to remove and replace the windscreen washer pump on a Volkswagen Polo. First, lift…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the windscreen washer jet on a Volkswagen Polo, open the bonnet to access the internal area at the base. Here you will find the internal p…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In order to replace the windshield washer pump of the Volkswagen Polo, you need to loosen the screws that secure the left front wheel, so that it can…

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos