Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Fluid Reservoir on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
Video tutorial

Before starting, open the bonnet of your Volkswagen Polo. Begin by removing the battery by disconnecting the terminals, then remove the bolts securing the battery to its support brackets. This will give you access to the plastic screws securing the windscreen washer fluid reservoir, which you will need to unscrew and remove.

Next, disconnect the hose attached to it by simply loosening the clip. Once this step is complete, you can remove the reservoir, finishing the disassembly.

To install the new windscreen washer fluid reservoir, simply reverse these steps, and the replacement will be complete.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Fluid Reservoir on a Volkswagen Polo
How to Replace the Windscreen Washer Fluid Reservoir on a Volkswagen Polo
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Before you can start, open the bonnet of your Volkswagen Polo. Begin by removing the battery, disconnecting the terminals, and then removing the bolt…
Where is the Power Steering Fluid Reservoir on a Volkswagen Polo?
Where is the Power Steering Fluid Reservoir on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video, see where the power steering fluid reservoir is located on a Volkswagen Polo, useful if you need to top it up. As shown, the reservoir…
How to Replace the Fuel Filter on a Volkswagen Polo 1.4 TDI
How to Replace the Fuel Filter on a Volkswagen Polo 1.4 TDI
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, you can see how to replace the fuel filter on a Volkswagen Polo. First, lift the bonnet and secure it with the appropriate pr…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos