Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the oil change on a Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Today we will see how to reset the oil change warning light on a Volkswagen Golf 7. So let's start the operation by turning on the four hazard lights with the vehicle off, then we press and hold the central "0.0" button on the speedometer and turn on the vehicle's ignition to the first position.

Once this is done, we will be asked to perform the service reset, so we confirm the operation by releasing the "0.0" button and then pressing it again.

Finally, we repeat the same reset procedure but wait for the request to perform the inspection reset to complete the job.


Posted on 20 January 2026 by ScegliAuto


Related tutorials

How to Change the Gearbox Oil on a Volkswagen Golf
How to Change the Gearbox Oil on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, learn how to change the gearbox oil on a Volkswagen Golf. Position your car on a column lift and raise it to a comfortable height for …
Changing the Manual Gearbox Oil on a Volkswagen Golf
Changing the Manual Gearbox Oil on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This guide outlines the steps to change the manual gearbox oil on a Volkswagen Golf. First, lift the vehicle and begin by removing the plastic engine…
Resetting the engine oil change indicator light on the Volkswagen Golf.
Resetting the engine oil change indicator light on the Volkswagen Golf.
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In a few simple steps, we will see how to reset the engine oil change indicator light (service) of the Volkswagen Golf. First, we get into the car an…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos