Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear light assembly of a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Tail light

Let's see how to replace the rear light assembly of a Volkswagen Passat B6: we can find them on AliExpress with the code 1005010400208920 at a price of 22.09 euros each with free shipping. Open the trunk and remove the fabric cover of the side cargo area; unclip the clips, being careful as they can tear the fabric of the panel (as shown in the video). Remove the panel and see the back of the light; disconnect the electrical connector and unscrew the three 10 mm nuts, being careful not to drop them. Now remove the light assembly. If the gasket is dry, we can take it off from the outside by pulling it towards us. Now let's clean the seat well from dirt, adhesive residue, and silicone, prepare the gasket, and insert the new light assembly, then from the inside, screw the 10 mm nuts onto the threaded pins. Reconnect the electrical connector, put the fabric panel back in place, and check the operation of all functions of the new light assembly. Check the watertightness of the gasket and close the trunk.

Posted on 22 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) Follow this guide to remove the fuel pump assembly from a Volkswagen Passat. First, disconnect the battery cables, then remove the rear seat from the…
Volkswagen Passat (2005-2010 / B6, 3C) Remove the rear light of a Volkswagen Passat to replace the damaged bulbs. Open the boot lid and use a lever to remove the plastic cover of the rear …
Volkswagen Passat (2010-2014 / B7) Today, you will see the instructions that will allow you to disassemble and replace the front fog light bulbs on the Volkswagen Passat. First, move t…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos