Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Internal Fuses of the Volkswagen Fox

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Fuse box

Today's information will allow you to access the internal fuse box of the Volkswagen Fox, as well as retrieve the diagram and layout. First, get inside the vehicle on the driver's side and start removing the plastic cover located below the steering wheel; inside, you will find the fuse box, as shown in the video. In this specific case, the fuse for the windscreen washer pump is being replaced; usually, the diagram and layout of the fuses can be found inside the cover, or in the vehicle's user and maintenance manual.

Posted on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Internal Fuse Layout and Positioning for the Volkswagen Fox
Internal Fuse Layout and Positioning for the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Below are the instructions that will allow you to access the internal fuse box, along with the layout and diagram for the Volkswagen Fox. First, open…
Where are the Fuses in the Volkswagen Fox?
Where are the Fuses in the Volkswagen Fox?
Volkswagen Fox (2006-2019 / Suran) The Volkswagen Fox, also known as the Volkswagen Suran, contains three fuse boxes, two located inside the cabin and one in the engine compartment. To…
Where to Find the Fuse Box in the Volkswagen Fox
Where to Find the Fuse Box in the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This video shows where the fuse box is located in the Volkswagen Fox, the small German hatchback from the mid-2000s. To access the relevant area, ent…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos