Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch Panel on a Volkswagen Atlas?

Model: Volkswagen Atlas Terramont MK 1 - Years 2017-2025
Part: Push button

To replace the window switch panel on a Volkswagen Atlas, loosen the screws that secure the door panel to its housing: these are located in the central lower part of the panel and in the area of the inner handle. Once the screws are loosened, proceed to detach the panel from its housing to disconnect the connectors of the switch panel: it can now be removed from its housing using a tool for leverage. Now, insert the new replacement part and reassemble the panel.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Turn Signal Lights on the Volkswagen Atlas
How to Replace Turn Signal Lights on the Volkswagen Atlas
Volkswagen Atlas Terramont (2017-2025 / MK 1) In today's video, you will see how to replace the turn signal bulb on the Volkswagen Atlas. Specifically, you will see how to install an LED bulb ins…
How to Reset the TPMS Light on the 2021 Volkswagen Atlas
How to Reset the TPMS Light on the 2021 Volkswagen Atlas
Volkswagen Atlas Terramont (2017-2025 / MK 1) If you own a 2021 Volkswagen Atlas and want to manually reset the TPMS light, read this guide carefully and follow the steps provided. First, start t…
Where is the fuse box of the Volkswagen Atlas located?
Where is the fuse box of the Volkswagen Atlas located?
Volkswagen Atlas Terramont (2017-2025 / MK 1) If you own a Volkswagen Atlas and need to intervene on the fuses to resolve any electrical faults, simply follow the steps described in the following…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos