Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on a Volkswagen Golf V

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Parking brake

To adjust the handbrake on a Volkswagen Golf V, start by removing the cup holder and lifting the cover of the central console; under the removed cover, you will find two screws, and inside a small cover, there is another screw, plus two more on the sides. Lift the console and remove the central tray. Now, there is one last screw to remove, which requires extensions. Lower the handbrake and lift the back of the central console: you will see the adjustment screw. Pull the lever three clicks and insert the socket onto the adjustment nut: turn it until you feel the correct tension. Test the lever and check that the rear wheels turn freely with the brake released. Then, reassemble everything in reverse order.

Posted on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this guide, adjust the handbrake on a Volkswagen Golf 4. Use a screwdriver to remove the cover located at the back of the armrest; disconnect the …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To adjust the handbrake on a Volkswagen Golf, loosen the screws that secure the plastic cover of the centre tunnel. Once these three screws are loose…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To adjust the handbrake of the Volkswagen Golf, you will need to loosen the screws that secure the central tunnel cover: once the screws have been un…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos