Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

In this guide, you will find instructions to dismantle and replace the alarm siren on the Volkswagen Golf. First, move to the right side to remove the front wheel arch; inside the wing, you will find the siren of the anti-theft system. Unscrew the securing screws and disconnect the power wiring to remove it, as shown in the video.

At this point, carry out the repair or replacement of the alarm siren, testing its operation; then, simply reassemble the front wheel arch!


Posted on 25 May 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) To signal the opening and closing of the vehicle with a clearly recognisable sound, consider installing an alarm siren (for example, one salvaged fro…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) If the remote key battery is so low that it cannot open the car or deactivate the alarm system, proceed as follows: this is a manual procedure that a…
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) It should be noted that the vehicle shown in the video is a Volkswagen Golf 7, but the work illustrated and described here involves the same operatio…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos