Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light on the Volkswagen Golf 6?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: License plate light

See other generations:
Video tutorial

It should be noted that the car shown in the video is a Volkswagen Golf 7, but the type of work illustrated and described involves the same operational steps in the Volkswagen Golf 6, so it can be taken into consideration. A repair of this kind does not require any technical experience, in fact it is simply a matter of removing the small license plate light fixture from the rear hatch, pulling out the bulb holder, removing the bulb and replacing it. We finish by reassembling everything with equal simplicity, without the use of any tools.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the number plate lights with LED ones on the Volkswagen Golf 6, start by unclipping the light unit from the bumper of the car, disconnect …
How to Change the Number Plate Lights on a Volkswagen Golf
How to Change the Number Plate Lights on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide explains how to remove and replace the bulb of the number plate light or the entire unit on a Volkswagen Golf in simple, quick steps. Firs…
Replacing the Number Plate Bulbs on Volkswagen Golf 7
Replacing the Number Plate Bulbs on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) How do you replace the number plate bulbs on a Volkswagen Golf 7? Follow this video to replace the damaged bulb. Open the boot lid: use a screwdriver…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos