Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuse Box on a Volkswagen Passat B7

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

If you encounter an electrical fault with your Volkswagen Passat B7, you will likely need to check one or more fuses in the fuse boxes. If you don't know where they are, here are the locations: under the bonnet, next to the 12-volt battery that powers the vehicle, and inside the cabin, at the far left of the dashboard.

The protective panels installed above them open easily; they are clipped in place, while the cabin panel is secured with perimeter clips, nothing difficult.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

What is the fuse diagram and where is the fuse box located in a Volkswagen Passat?
What is the fuse diagram and where is the fuse box located in a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) The accompanying video shows the complete diagram of the exact positioning of the fuses in our Volkswagen Passat. All these fuses are located inside …
What is the Fuse Diagram for the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) In this video, you can see the location of the fuse boxes and their diagrams for the Volkswagen Passat B7, to consult if you need to check the fuse o…
Where to find and how to access the fuse box of a Volkswagen Passat?
Where to find and how to access the fuse box of a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) Good morning! Today, focus on locating and accessing the fuse box of your Volkswagen Passat. Start by opening the door on the right side of the drive…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos