Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for the Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Battery

Below we will see step-by-step instructions on how to disassemble and replace the battery of the Volkswagen Passat. First, we open the hood of the car and start removing the upper protection; then we disconnect both battery terminals (positive and negative), then unscrew the battery bracket screws with a socket wrench with extension, as shown in the video. At this point, we remove and replace the battery with the new one, of the correct type and with the same amperage; we connect it and start the engine!

Posted on 15 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery of the Volkswagen Passat?
How to replace the remote battery of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) This tutorial shows how to replace the battery of the Volkswagen Passat remote, a very simple and quick operation. You will need a small flat-head sc…
How to replace the key battery of a Volkswagen Passat
How to replace the key battery of a Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Start by pressing and holding the side button of the electric key of your Volkswagen Passat, then extract the physical emergency key. Next, use the e…
How to Replace the Remote Battery in the Volkswagen Passat?
How to Replace the Remote Battery in the Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, you will learn how to replace the remote battery in the Volkswagen Passat, a very simple and quick operation. You will need a repla…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos