Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Transporter?

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To clear the Service light from the instrument cluster of the Volkswagen Transporter, connect a diagnostic tool to the vehicle's OBD port, located under the steering column: once connected, select the car model and its corresponding version. Then, follow the procedure indicated on the scanner's screen to completely clear the light by removing the error.

Finally, disconnect the diagnostic tool and turn off the ignition.


Posted on 13 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / T6, MK 6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
How to reset the Service light on the Volkswagen Transporter?
How to reset the Service light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To reset the Service light on the Volkswagen Transporter, press and hold the 0.0 button located on the right side of the instrument cluster while it …
How to Reset the Service Light on the Volkswagen Transporter?
How to Reset the Service Light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) By holding down the 0.0 button located on the right side of the instrument panel, you can start the reset of the Service light on the Volkswagen Tran…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos