Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Virtus?

Model: Volkswagen Virtus Polo Sedan MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

You can reset the Service light on the Volkswagen Virtus by turning on the ignition, inserting the key into the ignition switch: once the ignition is on, press and hold the button to access the menu on the right side of the steering wheel. When the menu appears, navigate to select the "Reset oil change" option while holding the OK button; after a few seconds, the light will be reset, and the instrument cluster can be turned off to complete the reset procedure.


Posted on 30 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Virtus?
How to Reset the Service Light on a Volkswagen Virtus?
Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) You can completely reset the Service light that appears on the instrument cluster of the Volkswagen Virtus by pressing and holding the button with th…
How to Reset the Service Light on a Volkswagen Virtus Polo Sedan?
How to Reset the Service Light on a Volkswagen Virtus Polo Sedan?
Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) To reset the service light on a Volkswagen Virtus Polo Sedan, use the two buttons located below the instrument cluster display. Press the leftmost bu…
How to Reset the Trip Odometer on a Volkswagen Virtus
How to Reset the Trip Odometer on a Volkswagen Virtus
Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) You can reset the trip odometer on the Volkswagen Virtus by turning on the instrument cluster after inserting the key into the ignition switch: once …

Other guides you may be interested in

How to Replace the Rear Light Bulb on a Citroen C5

To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. Disconnect the light connector and remove the screw. Take out the light unit and proceed to replace the stop light bulb. Open the light housing and replace the bulb. Follow the same procedure for the right rear light bulb. Once the replacement is complete, refit the light unit, reconnect the connector, and close the side carpet. If the bulb does not work correctly, check the fuse related to the light before replacing it again.

Watch the video!


by ScegliAuto

More videos