Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from a Volkswagen Caddy

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020

Here are the main instructions on how to dismantle and remove the fuel tank from a Volkswagen Caddy. First, lift the vehicle and support the tank with a hydraulic jack. Then, unscrew all the screws of the brackets found on the sides of the tank, followed by disconnecting the fuel pump lines as shown in the video. At this point, empty the tank to carry out the necessary repairs, replacing it with a new one if needed; reassemble and connect the fuel tank, applying the reverse procedure.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of a Volkswagen Caddy?
Where is and how to reach the fuse box of a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) The fuse box of a Volkswagen Caddy is located in the engine compartment, near the right side. To access it, open the front hood of your Volkswagen Ca…
How do you replace the timing belt of the Volkswagen Caddy?
How do you replace the timing belt of the Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / MK 3, 2K) In order to replace the timing belt of the Volkswagen Caddy, you need to loosen the screws that secure the front right wheel of the vehicle, removing…
How to remove the rear light of the Volkswagen Caddy?
How to remove the rear light of the Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / MK 3, 2K) To remove the rear light of the Volkswagen Caddy, open the rear doors to access the frame next to the corresponding light: here you will find the scr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos