Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light on a Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
This video is currently unavailable

The video guide provided is applicable not only for the Volkswagen Caddy but for several vehicles from the same manufacturer, as well as others like Audi, Skoda, and Seat. When the warning light is on, unless there are technical issues, you need to refill this anti-pollution additive, which has a dedicated tank.

If the warning does not turn off after this operation, take the vehicle to a workshop where, as shown in the video, a PC with the appropriate software is connected to the OBD port, configured, and the fault is searched for and cleared.


Posted on 11 July 2026 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / 2K, MK 3) In this guide, we will provide instructions to top up the AdBlue liquid and then reset the warning light on the Volkswagen Caddy. First, get inside t…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today's main instructions will show you how to reset the AdBlue refill warning on the Volkswagen Caddy. To perform the reset, you must first refill t…
Volkswagen Caddy (2020-2026 / SB) To reset the AdBlue warning light on the Volkswagen Caddy, first top up the tank with the necessary amount of additive fluid. Open the fuel flap to a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos