Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Headlight

This guide provides instructions for removing and replacing the front headlight of the Volkswagen Tiguan. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found at the top of the headlight assembly; then disconnect the electrical connector of the bulbs, thus removing the entire front headlight, as shown in the video. At this point, replace the bulbs or the entire headlight assembly, securing it properly to the bodywork; check the correct functioning of all the bulbs!

Posted on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of a Volkswagen Tiguan?
How to Remove the Front Headlamp of a Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Good morning, today’s objective is to remove the front headlamp of our Volkswagen Tiguan. Before you begin, open the bonnet by acting on the release …
How to replace the headlight bulb on the Volkswagen Tiguan?
How to replace the headlight bulb on the Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To replace the headlight bulb on the Volkswagen Tiguan, open the bonnet and access the rear of the corresponding headlight. You will need to detach t…
How to Remove and Replace the Front Headlamp of the Volkswagen Tiguan
How to Remove and Replace the Front Headlamp of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) These brief and simple instructions will allow you to remove and replace the front headlamp of the Volkswagen Tiguan in a few easy steps. First, open…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos