Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp of a Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight

See other generations:
Video tutorial

Good morning, today’s objective is to remove the front headlamp of our Volkswagen Tiguan. Before you begin, open the bonnet by acting on the release lever located inside the cabin.

Start by removing the front bumper by unscrewing the fixing screws and clips positioned around the entire perimeter of the bumper. Next, loosen and remove the bolts that secure the front headlamp to the vehicle.

After that, extract the headlamp from its housing. This will free the front headlamp.

At this point, disconnect the electrical connector. Once you complete this step, you will have finished removing the front headlamp of our Volkswagen Tiguan.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this guide, we will see the instructions that will allow us to disassemble and replace the front headlight bulbs on a Volkswagen Tiguan. First, op…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this video, learn how to remove and replace the front headlamp on the first series Volkswagen Tiguan by following the instructions below. First, o…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Below are the instructions for removing and replacing the front fog light bulb on a Volkswagen Tiguan. To access the fog light bulb, you will need to…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Warning Light on the Hyundai I10

The tyre warning light on the instrument panel of your Hyundai I10 (third series) alerts you when there is a puncture or when the tyres are inflated to the wrong pressure. If it lights up accidentally, you can reset it manually by following these steps. Once the instrument panel is on, press the directional button located on the right side of the steering wheel and find the tyre pressure display screen. Finally, press and hold the "OK" button for a few seconds and select the "Set" option to complete the reset of the light.

Watch the video!


by ScegliAuto

More videos