Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Volkswagen Golf Mk7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Door trim panel

Today, in this video tutorial, you will learn how to remove the door panel from a Volkswagen Golf Mk7. First, open the front door and start by removing the caps found on the panel to access the screws underneath. Now remove the grab handle by unclipping it from the sides and unscrew the screws. Remove the reflector and unscrew the screw with a torx screwdriver. At this point, you can unclip the door panel by levering at multiple points and pulling: finally, disconnect the electrical connector!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Panel on Volkswagen Golf 7
Removing Door Panel on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide, you will see how to remove the rear door panel of the Volkswagen Golf Mk7. First, remove the grab handle using a plastic lever to avoi…
Removing the Door Panel of a VW Golf 7
Removing the Door Panel of a VW Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) How to remove the door panel of a Volkswagen Golf Mk7? Before starting the disassembly, disconnect the battery terminals located in the engine bay. U…
How to disassemble the rear door panel of the Volkswagen Golf
How to disassemble the rear door panel of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Let's briefly see the steps that will allow us to disassemble and replace the rear door panel of the Volkswagen Golf. First, we open the rear door an…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos